Johnson Controls PCV1615 Programmable VAV Box Controller Actuator FX-PCV1615-0 For Sale

Johnson Controls PCV1615 Programmable VAV Box Controller Actuator FX-PCV1615-0

This item has been shown 31 times.

Buy Now

Johnson Controls PCV1615 Programmable VAV Box Controller Actuator FX-PCV1615-0:

Johnson Controls PCV1615 Programmable VAV Box Controller with Actuator FX-PCV1615-0
From surplus inventory liquidation. Was in original box, but is opened and cannot ensure new/new as it wasn't sealed. So selling as new/other open box.
Mfg info:
The controllers are designed for controlling VAV boxes. These FX-PCV controllers feature combinations of an integral digital pressure sensor (DPT), a damper actuator, and a 32-bit microprocessor. The FX-PCV1626 has an actuator but does not contain a DPT. The FX-PCV1628 model has a DPT but does not contain an actuator. The controllers' small package size facilitates quick field installation and efficient use of space without compromising high-tech control performance. These FX-PCV controllers connect easily to the wired and wireless network sensors for zone and discharge air temperature sensing.
Switchable Communications Protocols
By default, the MetasysFX-PC family controllers and network sensors communicate using the standard BACnet® protocol, based on the ANSI/ASHRAE 135-2004. The BACnet protocol is a standard for ANSI, ASHRAE, and the International Standards Organization (ISO) for building controls. FX-PCG, FX-PCX, and FX-PCV controllers are BTLtested and listed as BACnet Application Specific Controllers (B-ASCs). FX-PCA field controllers are BTL-listed as BACnet Advanced Application Controllers (B-AACs). The NS Series Sensors are BTL-listed as BACnet Smart Sensors (B-SSs).
Release 10.1 of FX-PCT and later can be used to switch the Field Bus communications protocol in FX-PC Controllers to be either the standard BACnet Master-Slave/Token-Passing(MS/TP)or the N2protocol. BACnet MS/TP is the default communications protocol for all new controllers. Switchable communications protocols provide a cost-effective upgrade and modernization path for customers with existing N2 controllers. The Modernization Guide for Legacy N2 Controllers (LIT-12012045) and the controller-specific documentation provide installation and commissioning support and include tips for efficient and safe replacement. Refer to the N2 Compatibility Options chapter of the Controller Tool Help (LIT-12011147) for information about mapping N2 Objects in controllers with switchable communications protocols. The N2-capable FX-PC controllers can be used as functional replacements for legacy N2 controllers. The N2-capable FX-PC controllers: • have the I/O quantities and characteristics of the FX-PC family controllers • must be programmed with FX-PCT, which has programming capabilities that are similar (but not identical) to HVACPro, GX9100, GPL, and other legacy tools • support SA Bus devices • support FX-WRZ wireless sensors from the controller using the FX-WRZ7860 receiver when configured for BACnet MS/TP communication The N2-capable FX-PC controllers: • do not support Zone Bus (for example, TMZ sensors and M100 actuators) • do not support pass through in the commissioning mode • donot support remotedownloadingor commissioning using BACnet routing • do not support wireless connection to the N2 bus

Buy Now