New 1680 Pieces Silicon Image SII5723CNU SATA to Dual eSATA Storage Processor For Sale
This item has been shown 14 times.
New 1680 Pieces Silicon Image SII5723CNU SATA to Dual eSATA Storage Processor:
New 1680 Pieces Silicon Image SII5723CNU SATA to Dual eSATA Storage Processor - this is a factory sealed brick in original factory box. sale is for one brick of 1680 pieces. Your package of 1680 pieces will be from the following date code: 0733, 0812, 0813
We are clearing out most of our new, old stock. All parts are factory new surplus from
projects and have never been used. They
have been properly stored with regard to moisture control and electro static
discharge. All parts will be shipped in
secure, anti-static packaging. If you
are looking for any different quantities or even something that we’re not
currently listing, please contact us.
SteelVine™ Storage ProcessorSATA to Dual eSATA Storage Processor
The SteelVine SiI5723 storage processor is a low-cost, single chip solution designed to be
built into DVRs, PC motherboards and consumer electronics devices. It features a 3Gbps
SATA host interface and two eSATA capable device ports. The SiI5723 features Silicon
Image’s proprietary eSATA based capacity expansion, which allows users to grow the
capacity of an existing SteelVine enabled device by adding additional drives that appear to
the host system as additional space in the existing SteelVine volume.
The SteelVine SiI5723 storage processor extends
the capabilities of consumer electronics and DVR
devices as well as PC motherboards by adding
eSATA, capacity expansion, drive locking, singlebutton
backup support and other advanced storage
features on a single chip that easily integrates
with existing designs via a SATA connection.
Drive locking helps protect users’ data by allowing
them to password ‘lock’ directly attached and
cascaded drives. If a locked drive is detached from
its assigned computer or cascade, the data on the
drive will be inaccessible until it is reconnected
and unlocked with the user supplied password.
SiI5723 storage processors support JBOD and the
following RAID modes: FAST (RAID 0), SAFE
(RAID 1) and BIG (Concatenation) as well as two
new multi-RAID modes, SAFE33, and SAFE50.
Multi-RAID modes automatically create two virtual
volumes, one SAFE and the other BIG, and
are designed to balance the benefits of capacity
and protection with only two drives. SAFE50
divides the physical space on each drive equally to
create each virtual volume. In SAFE33, two-thirds
of the available physical space is used to create the
BIG partition, and the remaining one-third is used
for the SAFE partition.
When adding two drives to the SiI5723, BIG,
FAST, SAFE, SAFE33, SAFE50 and JBOD are supported.
When drives are cascaded, BIG, SAFE,
SAFE33 and SAFE50 are available. RAID mode
configuration can be accomplished through a
GUI, strap pins, or I2
C for true software-free
Serial ATA Host Interface Features• Serial ATA Gen2m compliance• eSATA and 2-meter cable support• 3 Gbps (auto-negotiates to 1.5 Gbps)• Compatible with PM aware and non-PM
aware hosts• Allows multiple drives to be accessed by nonPM
aware drive hosts• Supports NCQ
Device Interface Features• Serial ATA Gen2m compliance• eSATA and 2-meter cable support• 3 Gbps (auto-negotiates to 1.5 Gbps)• Independent 8 KB FIFO / Port• Power management capabilities• Supports hot plug• Supports ATAPI & asynchronous notification
Electrical Specifications• GPIO pins: 9 GPI, 6 GPO• 3.3V IO supply, 1.8V core supply• 1.02 watts (typical)
Environmental• Operating temperature: 0ºC to 70ºC• Operating relative humidity: 5% to 80%• Non-operating relative humidity: 5% to 95%
Physical Specifications• 88-pin QFN• 10mm x 10mm
Additional SteelVine features• No driver, BIOS or software required• User API interface through I2
C• No drive reformatting on RAID change• Email notification• Optional XML API• RAID 1 drive racing• Optional SteelVine Manager GUI• Mandatory SMART commands available• SAFE later